Elenco Digital Multimeter Manual de usuario descargar pdf (Pagina 5)

Replacing the Fuses

Warning

To avoid electrical shock or damage to the meter, only use

replacement fuses ∅5x20 0.5A/250V FAST or ∅6x25 10A/250V FAST.

1. Turn the Function Rotary Switch to the OFF position and remove

the test leads from the terminals. Remove the battery cover as

shown in Figure 18. Referring to Figure 19, examine or replace

the meter’s fuses as follows:

2. Using a screwdriver, unscrew the three screws on the back case.

Remove it by lifting it up from the bottom and carefully separating

the top part from the two mounting tabs.

3. Remove either fuse by gently prying one end loose, then sliding

the fuse out of its bracket.

4. Install ONLY the specified replacement fuses with the amperage,

voltage, and speed ratings:

∅5x20 0.5A/250V FAST or ∅6x25 10A/250V FAST.

5. Reinstall the back case. Secure the back case by turning the

screws clockwise.

Figure 19. Fuse Replacement

-32-

3. Safety Symbols

Symbols used on the meter and in this manual are explained in

Table 2.

Table 2. International Electrical and Relative Symbols

4. Front Plate of Meter

Figure 1. Front plate of the meter

-5-

AC (Alternating Current) Important Information

DC (Direct Current)

Caution, risk of electric shock

European Safety Standard Earth Ground

Double Insulated Low Battery Indicator

The symbol indicating separate

collection for electrical and

electronic equipment.

U.S. Safety Standard

LCD Display

Function Press

Button

Function

Rotary Switch

Input Terminal

Screws

Elenco

Fuse Part #

0.5A/250V ∅5x20

fast blow 533004

10A/250V ∅6x25

fast blow 531101

+ –

Screw

1 2 3 4 5 6 7 8 9 10 ... 17 18

Comentarios a estos manuales

Sin comentarios

Elenco Digital Multimeter Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Instrumentos de medición Elenco Digital Multimeter