Elenco Deluxe Digital / Analog Trainer with Tools Kit Ver Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 52
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
-5-
INSTALL COMPONENTS TO PC BOARD
Start Here
S1 - 5-pin connector
(see Figure A)
L-bracket
(see Figure B)
VR4 - 100kW pot
VR3 - 1kW pot
(see Figure C)
S3 - 3-pin connector
S2 - 3-pin connector
(see Figure A)
L-bracket
(see Figure B)
C8 - 0.1mF mylar (104)
(see Figure D)
Bottom left corner of PC board
Top left corner of PC board
Figure C
Mount down flush with PC board. The
value may be marked on the on the
back side of pot.
Cut off excess lead length after
soldering.
Figure B
Note: One side of the bracket
is longer. Mount this side to
the PC board. Mount the
bracket to the top legend side
of the PC board with a 4-40 x
1/4” screw and fiber washer.
Figure A
Mount the connector as shown and solder the
pins of the connector.
Figure D
Bend the capacitor at a 45
O
angle before soldering. Cut off
excess leads.
Cut off tab
4-40 x 1/4”
Screw
Top legend
side of
PC board
Fiber
washer
Bracket
PC board
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 51 52

Comentarios a estos manuales

Sin comentarios